AMMDENT CAL EXCEL LC

Description

Ammdent Lc Cal Excel is a light-curing radiopaque one-component calcium hydroxide material for cavity lining (base )for direct/Indirect pulp capping especially under Composites.

 

To prevent marginal leakage and infiltration of bacteria in the cervical/approximal margins, permanent isolation is recommended.

 

LC CALEXCEL can be directly applied to the tube. In the case of linings of more than 1mm apply and polymerize layer.

 

INDICATION : 

 

• As a liner for indirect pulp capping.

 

• As liner under all filling materials.

 

• As protection against acid when applying the total-etch technique.

 

ADVANTAGES : 

 

• Time-saving, direct application, and light-curing.

 

• Ready to use one component material.

 

• Acid Resistant.

 

• Effective protection of the pulp.

 

• It helps in the formation of secondary dentine.

 

• Excellent adhesion to composites.

 

• Low solubility in oral fluids.

 

• Syringe type for easy delivery of the paste into the canal. 

 

• 2 Extra Tips for prevention of cross contamination.

 

• Excellent antibacterial effect and radio-opacity.

 

• Premixed Paste.

Direction of use

APPLICATION : 

 

• The dental surfaces have to be dried thoroughly and contamination has to be avoided.

 

• The preparation corresponds to the rules of the usual filling technique.

 

• In direct proximity of the pulp, the application of an aqueous calcium hydroxide preparation is recommended. (CAL-EXCEL).

 

STEP 1: 

• Cure LC CAL EXCEL with halogen light.

 

STEP 2: 

• keep the light source as close as possible to the surface(approx1-2mm)and cure for at least 40-60 s.

 

STEP 3:

• In case of more distance extend curing time. 

STEP 4:

 

• Carefully remove excess materials with a rotating instrument and apply the filling according to the manufacturer's instructions.

 

STEP 5:

 

• LC CALEXCEL adheres to materials,e.g.crown and bridge materials, temporary sealants on methacrylate basis, certain impression materials (e.g.polyether).

 

STEP 6:

 

•  This could lead to the removal of the lining (core build-up).

 

STEP 7:

 

• In such cases, it isrecommended to apply an isolating agent(e.g.vasline, glycerine gel or similar).

 

STEP 8:

 

•  Remove isolating agent prior to definite application.

 

STEP 9 :

 

• The consistency of LC CALEXCEL does not allow to remove excess material with a probe, this could eventually remove the whole linning (use a rotating instrument).

 

STEP 10:

 

• After the use of LCEXCEL avoid direct light (operation lamp, sunlight)and apply the material immediately.

 

STEP 11:

 

• LC CALEXCEL contains calcium hydroxide, TEGDMA, BHT, UDMA, and amine. Do not apply the material in the case of patients with known allergies against the ingredients.

 

STEP 12:

 

• Eugenol and other contaminations (e.g.thymol)prevent the polymerization, therefore avoid contact with these materials.

 

STEP 13:

 

• Too short curing times and sufficient light intensity lead to incomplete curing, therefore check the halogen lamp/light guide regularly.

 

STEP 14:

 

• Eugenol and other contaminations (e.g.thymol)prevent the polymerization, therefore avoid contact with these materials.

 

STEP 15:

 

• Too short curing times and sufficient light intensity lead to incomplete curing, therefore check the halogen lamp/light guide regularly.