MIXING:

Dispense powder and liquid onto the pad . Using a plastic spatula, divide the powder into 2 equal parts. Mix the first portion with all of the liquid for 10 seconds. Incorporate the remaining portion and mix the whole thoroughly for 15 - 20 sec. (total time within 30 seconds)

RESTORATIVE  TECHNIQUE:

1. Prepare tooth using standard techniques. Extensive mechanical retention is not necessary. For pulp capping use calcium hydroxide  paste.
2. Wash & Dry but DO NOT DESICCATE. D-Techs dentine conditioner is recommended to remove the smear layer.
3. Mix the required amount of cement. Working time is 2 min.

from the start of mixing at 23C (73.4 F).Higher temperatures

will shorten working time.

1. Remove surface moisture but DO  NOT DESSICATE.
   1. Transfer cement to the preparation using a syringe or suitable placement instrument. avoid air bubbles.
   2. Form the contour, and place a matrix if required during the first 2 minutes of setting.
   3. Setting time is 4 min. after  start of mixing. Once set,

remove the matrix & immediately apply D-TechS varnish.