VOCO AMARIS GINGIVA - SET & REFILL

After minimally invasive preparation of the defect under rubber dam isolation, clean the surface and remove the water residues using faint airjet. Care should be taken to not overdry the dentin as to achieve a moist dentin surface (Moist Bonding)

Color designing

The presence of dark or yellowish cervical margins might impair the color effect of the restoration. Enclosure of these areas with the opaquer is recommended before applying the filling. The shade guide included in the set can be used to serve as an orientation to show the effect of combination of the opaquer with the restoratives.

The shade guide consists of the following components:

• White  - for light gingiva colour
• Light  - for medium gingiva colour
• Dark  - for dark gingiva colour
• Natural - for basic gingiva colour

However, the colour of the restoration can be adapted step by step by mixing

Opaquer application:

• Apply the opaquer onto the prepared surface and disperse thinly
• Light cure for 40 seconds
• Apply a second coat if necessary and light cure for 40 seconds
• Do not pull back the plunger so as to ensure proper working of the NDT syringe

Amaris Gingiva Application:

• Fillings more than 2mm in thickness must be applied in layers
• Each layer is light cured  for 40 seconds
• To ensure complete curing hold the curing light as close as possible to the restoration.
• Incomplete curing may lead to restoration failure
• Contour and finish the restoration immediately
• It is recommended to fluoridate the restoration margins at the end of the procedure.

Precautions:

Do not use zinc oxide eugenol containing materials with Amaris Gingiva.

Dispose the single use application cannula and cover the syringe with the cap after use.